ShenZhen YH Innovative Technology, Inc.
56
56
56
56
8 – HOOD (-)/TEMP1 (bottle green wire).
Input for connection of terminal switches of negative polarity of bonnet and
sensor of temperature, which configuring in motor compartment.
Bottle green wire is the wire of momentary negative
trigger.
That wire must connect to earlier installed terminal switch of bonnet and carrier, second contact of it always is
connected with “mass”.
9 – TACH/GEN (tachometer/signal of working generator (oil pressure sensor) – green wire with orange strip).
Connect
that wire to low-tension signal with level from 0-4 to 0-12 V.
For control over high-tension signal of tachometer 0-200
V use supplementary resistors for matching between level of pulse signal.
In condition of definition of starting engine by signal of tachometer may use connective wire TACH to line of control
over fuel nozzles or primary winding of bobbin (bobbins) of ignition of cars with petrolic engines of sprayer with system
of ignition of distributed kind.
In condition of control over auto run of engine by signal of working generator connect green wire with orange strip to
wire of delivery winding of excitation of generator over outside resistor by resistance 0-56 kilohm. It is necessary to do
the adjustment of resistance of resistor for providing more smooth starting the engine of your car. In condition of control
over condition of auto run of engine by signal of generator, may connect that wire to wire of oil pressure sensor at the
event of those levels of controlled signals are changed from 0 to 12 V.
10 – SPEEDOMETER (-) (bottle green wire with brown strip). Input for connection to speed sensor of the cars of Volga
Automobile Plant (also other name-plates of cars with analogic technical specifications) for activation of service or
protective functions.
Bottle green wire with brown strip is the wire of momentary negative trigger, which activating at
threefold short circuit to mass of input.
That wire must connect to signal wire of speed sensor of the car Volga
Automobile Plant.
Use
Use
Use
Use the
the
the
the speed
speed
speed
speed sensor
sensor
sensor
sensor
If in Your car electronic speed sensor is used (cars of Volga Automobile Plant), You may use its such as originator of
automatic locking of doors` lock in the car or turning of condition on “Anti-Hi-Jack” at beginning of movement.
For
that:
1.
Connect bottle green wire with brown strip to signal wire of speed sensor of the car;
2.
Program required functions F3.4/F19.3.
Manual
Manual
Manual
Manual turning
turning
turning
turning of
of
of
of condition
condition
condition
condition on
on
on
on “
“
“
“Anti-Hi-Jack
Anti-Hi-Jack
Anti-Hi-Jack
Anti-Hi-Jack”
”
”
”
Condition “Anti-Hi-Jack” may be locked manually at utilization of supplementary button switch of connected to wire
“Speedometer” (-).
1.
Turn on the condition F19.3.
2.
Turn on the ignition.
3.
Do more three rapid pressings the button of supplementary button switch.
4.
System turns on the condition “Anti-Hi-Jack”.
12, 13, 14 – channel CH5 (Cambridge blue with black strip/Cambridge blue with red strip/Cambridge blue with yellow
strip).
Output of control by channel CH5 is three output relays with current of loading not more 25 A in pulse condition
of control.
That
That
That
That channel
channel
channel
channel may
may
may
may use
use
use
use as
as
as
as
�
Pulse output with programmable length of opening locks of passenger doors at graded condition of control over
central locking (pulse appears at iterative pressing the button of trinket – “divest out of protection” after turning of
condition off “protection”).
Length of pulse corresponds to value which installed in function F7.
�
Pulse output to 20 seconds at dismounting system out of protection (edition of utilization – output of control over
polite backlight).
Turning of ignition on abolishes action of pulse at any time.
