Car security systems
31
31
31
31
and transponder disappear, therefore at programmable supplementary transmitters and transponder which being
transmitters (transponders) must be programmed newly.
System supports in memory until four codes of trinket and transponders which is independent of that codes of four
different trinkets or as the same code is registered in system 4 times.
Important!
Important!
Important!
Important!
Because in transmitters changeable (dynamic) code is used always, in certain situations (for example, at pressing buttons
of trinket more 30 times outside the area of action of system) may occur the mistiming of trinket and system. In this event
come near to the car and during 1 second twice press the button (see picture 1) of transmitter. Synchronization will be
renewed, and trinket again can control over system.
Program
Program
Program
Program of
of
of
of transmitters,
transmitters,
transmitters,
transmitters, anti-hijacker
anti-hijacker
anti-hijacker
anti-hijacker of
of
of
of transponder
transponder
transponder
transponder
Record
Record
Record
Record of
of
of
of codes
codes
codes
codes of
of
of
of new
new
new
new transmitters
transmitters
transmitters
transmitters (F13
(F13
(F13
(F13 –
–
–
– condition
condition
condition
condition “
“
“
“Valet
Valet
Valet
Valet”
”
”
”))))
Important!
Important!
Important!
Important!
Remember that every operation must be accomplished during 5 seconds after previous operation. If 5 second interval is
exceeded, system leaves programmable condition automatically that will be confirmed by one short and one long signals
of siren. If in a programmable process it is turned of ignition off, system leaves the programmable condition immediately,
and that confirmed this by one short and one long signals of siren.
If record of code of anti-hijacker transponder guesses the system, and its delivery must be turned off until beginning of
procedure of programmable transmitters!
�
Divest system out of security, sit in the car and turn of ignition on.
�
Press the button switch “Valet” three times. You can hear one signal of siren which confirming that system is ready
for program of new transmitters.
�
Press and maintain the button 1 (see picture 1) of first transmitter, hitherto, until that YOU can hear long signal of
siren which confirming that program of first transmitter is completed (channels of transmitter will be programmed
automatically). Herewith LED begins to blink unusually.
�
Press and maintain the button 1 (see picture 1) of second transmitter, hitherto, until that YOU can hear long signal of
siren which confirming that program of second transmitter is completed. Herewith LED begins to blink unusually.
�
Repeat operation 3 for other transmitters.
�
Turn on delivery of transponder.
System must confirm the successful recording code by signal of siren.
Afterwards turn of delivery of transponder off.
�
For outlet from condition of programmable transmitters:
a)
Turn of ignition off or
b)
Waiting for 8 seconds does not make neither action.
You can hear one short and one long signals of siren, which confirming the outlet from condition of programmable
transmitters and LED of system flames out.
�
Turn delivery of transponder on for normal work of system at starting engine.
Record
Record
Record
Record of
of
of
of codes
codes
codes
codes of
of
of
of new
new
new
new transmitters
transmitters
transmitters
transmitters (F13
(F13
(F13
(F13 –
–
–
– condition
condition
condition
condition “
“
“
“Secret
Secret
Secret
Secret code
code
code
code”
”
”
”))))
