Car security systems
49
49
49
49
Readjustment
Readjustment
Readjustment
Readjustment of
of
of
of trinket-transmitter
trinket-transmitter
trinket-transmitter
trinket-transmitter of
of
of
of two-way
two-way
two-way
two-way contact
contact
contact
contact
Trinket-transmitter of two-way contact transmits radio signal of start/stop the engine after installed time of timer.
Radio signal from trinket-transmitter is transferred only in the event of that if indicator “SET” flashes on screen
LCD.
Control is permitted – indicator “SET” flashes on LCD.
Control is banned – indicator “SET” on LCD is absent.
Simultaneously press and maintain the button F and CH3 until appearance of indicator “SET” on screen LCD for
turning of control off.
Installation
Installation
Installation
Installation of
of
of
of time
time
time
time in
in
in
in trinket-transmitter
trinket-transmitter
trinket-transmitter
trinket-transmitter
1.
Press and maintain F (5) more 3 seconds.
2.
Timer of indicator “o`clock” will begin to blink, indicating condition of changing o`clock.
3.
By pressing button F (5) transfer to field of installation values of time of remote start.
Installation timers of
time of start are highlighted on LCD-monitor with parameters “S” and “R”.
“S” – timer of actual time of installation of active condition of channel.
“R” – timer of resetting active condition of channel.
Blinking indicator of time (clock, minutes) indicates that parameter of time may be changed.
4.
Install the hour of time of start.
Pressing the button CH2 changes reading to “+”.
Pressing the button CH3
changes to “+”.
Pressing the button CH3 changes reading to “-”.
5.
For transfer to installation of minute momentarily press and dismiss F (5).
Pressing the button CH2 changes
reading to “+”.
Pressing the button CH3 changes reading to “-”.
Every pressing to F (5) cyclically transmitters the installation area of hours or minutes of different timers.
6.
Press and maintain F (5) more 3 seconds for output out of condition of installation timers and closure of
blinking of indicator of hours.
Timer
Timer
Timer
Timer of
of
of
of starting
starting
starting
starting engine
engine
engine
engine by
by
by
by programmable
programmable
programmable
programmable interval
interval
interval
interval time
time
time
time during
during
during
during 48
48
48
48 hours
hours
hours
hours
(function
(function
(function
(function SF6)
SF6)
SF6)
SF6)
System provides possibility of automatic start of engine over given intervals of time (1, 2, 3 or 4 hours) during 48
hours; also remotely install the periodicity of start of the engine by means of command of trinket-transmitter or by
programmable intervals in function SF6.
Time of working engine is defined by installed value to SF3.
Remark
Remark
Remark
Remark
In condition of control over engine from manual gear-box – wind the engine and accomplish the procedure of
correct output out of machine.
Activation/deactivation
Activation/deactivation
Activation/deactivation
Activation/deactivation
Simultaneously press and maintain the buttons 1+3 (ARM+CH2) more 2 seconds.
System confirms
activation/deactivation of timer by turning on/turning off of icon 2 (hourglass) on display of trinket-transmitter,
also to 3 seconds leave the value of installed interval earlier.
Turning of timer of cyclic start off is accomplished analogically or automatically at full disconnection of delivery
by protection of system.
