Sharp UP-5900 страница 87 Скачать руководство пользователя

Страница: 87 / 132

UP-5900VS

HDI RECOVERY PROCEDURES (For VK version)

7 – 1

CHAPTER 7. HDI RECOVERY PROCEDURES (For VK version)

1. GENERAL

This manual describes the procedures to recover the UP-5900 hard

disk image (HDI) to factory setup state.

There are two ways to recover for the UP-5900.

Recovery by CD boot with CD drive (SCSI-connection) which has

bootable BIOS

Recovery by FD boot with bootable FD, USB-CD or SCSI-connec-

tion CD

Refer to “3. Recovery procedures with SCSI card/USB-CD device” to

select which way to recover.

Procedure

is simple to perform, because only Recovery CD-ROM is

used for recovering.

If CD booting is not available, use procedure

, In this case, a boot FD

must be prepared by referring to “5. Creating bootable FD for recovery-

ing HDI.”

2. REQUIRED ITEMS

• SCSI card + CD-ROM drive or USB-CD

(The driver must support DOS and CD-ROM drive must be able to

read CD-R format.

For USB-CD, it is recommended to use one with an AC adapter.)

• UP-5900 Product Recovery CD-ROM

• Keyboard

• 1.44MB floppy disk (Not required for CD booting)

3. RECOVERY PROCEDURES WITH SCSI

CARD / USB-CD DEVICE

*1: The boot area of “UP-5900 Product Recovery CD-ROM” includes

following ASPI drivers which are included in Windows98.

ASPI8DOS.SYS (Ver.1.32S)
ASPI8U2.SYS (Ver.1.00S)

Above drivers can be used for PCI I/F SCSI card from Adaptec

(AHA-2940AU and AHA-2910 series), but cannot be used for AHA-

2930U/AHA-2930U2. To use AHA-2930U/AHA-2930U2, driver file
ASPI8DOS.SYS (Ver.1.35 or later) /ASPI8U2.SYS (Ver.1.03 or

later) is required. (According to Adaptec support information)

*2: Checked device: CD-210PU by TEAC

4. PRECAUTIONS

• Use of the UP-5900 Product Recovery CD-ROM is limited to the UP-

5900. Never use it for other POS or PC.

• All files in the UP-5900 Product Recovery CD-ROM must be used

only for recovering UP-5900 hard disk image. Modification of any file

in the UP-5900 Product Recovery CD-ROM that is not described in
this manual is forbidden.

• SCSI or USB-CD to be used must support DOS drivers.

• Before executing recovery, be sure to back up all necessary files to

other media. When recovery is executed, all data in hard disk will be
deleted.

• When a SCSI device with bootable BIOS is used, system will boot

from SCSI device instead of UP-5900 FD/HDD due to boot device pri-

ority. To avoid this, boot from FD first, and then insert UP-5900 Prod-
uct Recovery CD-ROM into SCSI CD drive.

• Be careful to avoid breaker OFF or power failure during the recovery

procedure.

• When using USB-CD, it is recommended to use AC adapter for stable

power supply. Depending on device, it may be possible that power

supply from USB bus power (5V) is not enough to perform stable

readouts, resulting an error.

5. CREATING BOOTABLE FD FOR

RECOVERING HDI

(1) Create a Windows98 startup disk.

Open [Startup Disk] tab in [Add/Remove Programs] from the control
panel, and click [Create Disk] button. Follow the instructions shown

on the display.

(2) Delete the following files from “Windows98 startup disk” created in

the previous step.

(Files to be deleted)

ASPI2DOS.SYS

ASPI4DOS.SYS

ASPICD.SYS

ASPI8DOS.SYS

ASPI8U2.SYS

BTCDROM.SYS

BTDOSM.SYS

OAKCDROM.SYS

EBD.SYS(Hidden)

AUTOEXEC.BAT

CONFIG.SYS

SETRAMD.BAT

README.TXT

FLASHPT.SYS

EXTRACT.EXE

DRVSPACE.BIN

EBD.CAB

Adaptec
AHA-2940AU

(*1)

CD boot recovery
Refer to “6. Recovery procedures.”

Adaptec AHA-2910
series, etc. without
boot BIOS

FD boot recovery
(1) Refer to “5. Creating bootable FD for

recovering HDI” to create a bootable FD
for recovery.

(2) Refer to “6. Recovery procedures” to per-

form recovery with the bootable FD.

USB-CD

(*2)

Adaptec
AHA-2930U/
AHA-2930U2

(*1)

FD boot recovery
(1) Refer to “5. Creating bootable FD for

recovering HDI” to make a bootable FD
for recovery.

(2) Refer to “6. Recovery procedures” to per-

form recovery with the bootable FD.

(Note: Be careful not to boot from CD.)

SCSI with boot BIOS,
made by other than
Adaptec

Содержание UP-5900





































































































































Результаты поиска

Содержание UP-5900

Отзывы:

Похожие инструкции для UP-5900

Бренды по названию

Популярные бренды

Sharp UP-5900, Руководство по обслуживанию

Результаты поиска

Содержание UP-5900

Отзывы:

Похожие инструкции для UP-5900

Бренды по названию

Популярные бренды