E-26
SD-AT100W(X)E3.fm
02/2/27
SD-AT100W
ENGLISH
4
Prepar
ation for
Us
e
- S
e
tt
in
g
t
h
e clo
c
k -
Setting the clock
By setting the unit on time, you can use it not only as a clock but also for timer play-
back.
[Back]
In this example, the clock is set for 9:30.
[When the power is on]
Press the TIMER button.
Within 10 seconds, press the or button to select "CLOCK".
The time display will appear for about 10 seconds.
To readjust the clock:
Perform "Setting the clock" from the beginning.
!
In step 2, "TIMER STANDBY" appears. If the clock is cleared, "SLEEP" appears.
!
In step 3, press the or button to select "CLOCK", and the press the ENT but-
ton.
Caution:
Unplugging the unit or power failure will clear the clock setting.
Perform "Setting the clock" from the beginning.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the TIMER button.
3
Within 10 seconds, press the or button to select "ADJUST",
and then press the ENT button.
4
Press the or button to adjust the
hour and then press the ENT button.
Press the or button once to advance the time by 1 hour. Hold it down to ad-
vance continuously.
5
Press the or button to adjust the
minutes and then press the ENT but-
ton.
!
Press the or button once to advance the time by 1 minute. Hold it down
to advance continuously.
!
The hour will not advance even if minutes advance from "59" to "00".
!
The clock starts from "0" second. (Seconds are not displayed.)
To confirm the time display:
[When the unit is in the stand-by mode]
Press the DISPLAY button on the remote control.
The time display will appear for about 5 seconds.
Downloaded from:
