E-30
SD-AT100W(X)E3.fm
02/2/27
SD-AT100W
ENGLISH
4
B
asic Ope
ration
- Pl
ayin
g
a
d
isc
-
Caution:
!
Close the disc compartment when it is not in use. Otherwise, dust may accumulate
inside and cause malfunction to the unit.
!
The unit is slightly heated when used for a long time. It does not mean the unit is
damaged.
!
Be careful not to jam your fingers in the disc compartment cover.
Notes:
!
A safety feature automatically sets the unit to the power stand-by mode if you set
the volume level too high whilst playing certain types of discs. If this happens,
lower the volume level and restart playback.
!
Stop positions may be recorded on some discs. When you play such a disc, play-
back stops there.
!
During an operation, " " may appear indicating that the operation is disabled by
the disc.
"
To interrupt playback
Press the DVD/CD button.
To resume playback from the same point, press the DVD/CD button again.
"
To stop playback
Press the DVD/CD button.
"
To play a video CD with P. B. C. (playback
control)
The operation may vary depending on the video CD. Refer to its manual for details.
To play without displaying the menu:
Note:
Depending on the P. B. C. of the disc to be played, buttons such as
,
,
and
may function differently.
[Front]
[Back]
1
Press the DVD/CD button.
Display
The menu screen appears.
2
Select the desired menu number using the direct
buttons (0 - 9).
3
Press the ENT button to start playback.
After pressing the DVD/CD button, press the
button.
The P. B. C. function will be cancelled, and the normal playback
will begin.
Downloaded from: