manualshive.com logo in svg

Sharp MX-2314N, Руководство по обслуживанию, Страница: 74 / 524

Поделиться
Скачать
Sharp MX-2314N Скачать руководство пользователя страница 74

MX-3114N  ADJUSTMENTS AND SETTINGS  5 – 25

a. Color copy check items (Check to confirm the following:)

1)

There are 12 void areas.

2)

Registrations (one point for the main scanning, and one point
for the sub scanning) are not shifted.

3)

The resolution of 5.0 (5 points) can be seen.

4)

The color difference in gray balance between the F and the R
sides is not so great.

5)

There are no white and black streaks.

6)

Color texts are clearly reproduced.

7)

The background density is not so light.

Содержание MX-2314N













































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов