manualshive.com logo in svg

Sharp MX-2314N, Руководство по обслуживанию, Страница: 60 / 524

Поделиться
Скачать
Sharp MX-2314N Скачать руководство пользователя страница 60

MX-3114N  ADJUSTMENTS AND SETTINGS  5 – 11

By pressing [LEAD] or [OFFSET] key, the following items can
be executed individually.

* [LEAD]: Print image lead edge image position adjustment

* [OFFSET]: Print image off-center adjustment

When [ALL] is selected, both of the above two items are
executed simultaneously.

4)

Select a paper feed tray to be adjusted.

5)

Press [EXECUTE] key.

The adjustment pattern is printed out.

6)

Set the adjustment pattern on the document table.

Fit the adjustment pattern correctly with the document guide.

In this case, put 5 sheets of white paper on the printed adjust-
ment pattern.

7)

Press [EXECUTE] key.

The following item is automatically adjustment.

* Print image lead edge image position adjustment

* Print image off-center adjustment

8)

Press [OK] key.

The adjustment result becomes valid.

Perform procedures 4) to 7) for each paper feed tray.

 

4-C

Copy mode image lead edge position, 
image loss, void area, image off-center, sub 
scanning direction image magnification 
ratio automatic adjustment (Scanner) 
(Document table mode)

1)

Enter the SIM50-28 mode.

2)

Select [OC ADJ] with the key.

3)

Select the paper feed tray with paper in it with the key. 
(Any paper size will do.)

4)

Press [EXECUTE] key.

The adjustment pattern is printed out.

5)

Set the adjustment pattern on the document table.

Fit the adjustment pattern correctly with the document guide.

In this case, put 5 sheets of white paper on the printed adjust-
ment pattern.

ǂǂǂ6,08/$7,21ǂǂ12

&/26(

7(67

$872,0$*(326,7,21$'-8670(176(59,&(

(;(&87(

0)7

&6

$'8

&6

&6

&6

/&&

ǂǂǂ6,08/$7,21ǂǂ12

&/26(

7(67

$872,0$*(326,7,21$'-8670(176(59,&(

2&ǂ$'-

%.0$*ǂ$'-

63)ǂ$'-

6(78335,17ǂ$'-

5(68/7

'$7$

ǂǂǂ6,08/$7,21ǂǂ12

&/26(

7(67

$872,0$*(326,7,21$'-8670(176(59,&(

(;(&87(

0)7

&6

&6

Содержание MX-2314N













































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов