Sharp MX-2314N, Руководство по обслуживанию

Страница: 195 / 524

MX-3114N SIMULATION 6 – 62
Setting of the
execution
conditions of
the process
control L LO-COV Setting of the execution judgment of the
process control in continuous printing of
low print ratio images Enable 0 - 1 0 0
Inhibit 1
M TonerCA-END Setting of the process control interval
reduction when the toner cartridge
remaining quantity is 25% or less (If this is
set to Enable, item M RATIO is changed.) Enable 0 - 1 0 1
Inhibit 1
N AVERAGE-PAGE Setting of the number of pages of item HI-
COV set value 2 1: 10 pages - 5: 50 pages
1 step corresponds to 10
pages. 1 - 5 1 3
5
O LIMIT PAGE Setting of the number of connected jobs of
the process control and of the limit number
of the process control 1: 10 pages - 10: 100
pages
1 step corresponds to 10
pages. 1 -10 1 10
A number of reservation jobs are
connected. When the number of jobs
exceeds the specified number of pages
(the set value of this setting), the process
control is performed. / The process control
is performed by AND conditions of item
REV condition and the specified number of
pages (the set value of this setting). 10
P PIX_RATIO_BK Magnification ratio setting (%) of the BK toner count specified value
The set value of 100 corresponds to K print of A4 at the print ratio of 5%. 1 - 999 10
Q PIX_RATIO_CL Magnification ratio setting (%) of the color (CMY) toner count specified
value
The set value of 100 corresponds to K print of A4 at the print ratio of 5%. 1 - 999 10
R INTERVAL TIME Setting of the leaving time when turning ON the power (including the
sleep recovery time) (h: hour) 1 - 255 3
S HUM HOUR Interval setting of the temperature and humidity monitoring time of
"HUM" (unit: 10 minutes) 1 - 24 2
T HUM_DIF The specified value of the area difference in humidity between the level
at execution of the previous control and the current humidity (Applied to
item HUM) 1 - 9 2
U BK_RATIO Magnification ratio setting (%) of the specified value of the BK OPC
drum traveling distance of "REV2_BK" 1 - 999 (Entry of 20
corresponds to
100,000mm.)
15
V M_RATIO Magnification ratio setting (%) of the M OPC drum traveling distance of
"REV2_CL" 1 - 999 (Entry of 20
corresponds to
100,000mm.)
15
W COLOR BORDER Judgment criteria whether the BK high
density process control is individually
performed or not (Setting of the ratio of the
M OPC drum rotation distance for the K
OPC drum rotation distance (%)) 0: The BK process control
is executed regardless of
the M OPC drum traveling
distance. 0 - 999 20
1 - 999: 1 - 999(%)
X BK ONLY Setting of the frequency of execution of the
4-color high density process control when
only monochrome output is continued (The
result of this setting is applied only when
the M OPC drum rotation distance is
smaller than the set value of COLOR
BORDER.) Frequency of once for 5
times 0 - 6 0 5
Frequency of once for 1 - 5
times 1 - 5
The 4-color high density
process control is always
performed. 6
Y HT_DIF HT process control execution judgment developing bias variation value 1 - 255 40
Setting of the
execution
condition of the
registration
adjustment Z RG_ON_
SYNC CL Setting of execution of the registration adjustment when executing the
process control when turning ON the power When the color
process control is
executed. 0 0
ALL Executed
regardless of the
process control. 1
CL/BK When the color
process control
and the K process
control are
executed. 2
AA RG_TEMP_TIMER Time interval from registration adjustment after turning ON the power to
the next execution. 0 - 240
(MINUTE)
0
AB RG_PERM_TIMER Setting of inhibit time of execution of the registration adjustment 0 - 15
(HOUR)
1
AC RG_HOUR_TIMER Setting of the interval time of execution of the registration adjustment 0 - 15
(Above)+(HOUR)
5
AD RG_BW_SYNC Setting of Enable/Disable of the
registration adjustment after a
monochrome job Enable 0 - 1 0 1
Inhibit 1
Mode Item/Display Content Setting range
Default
value