Sharp MX-2314N, Руководство по обслуживанию

Страница: 150 / 524

MX-3114N SIMULATION 6 – 17
9
9-2
Purpose Operation test/check
Function (Purpose) Used to check the operations of the sen-
sors and detectors in the paper reverse
section (duplex section) and its control cir-
cuit.
Section Duplex
Operation/Procedure
The operating conditions of the sensors and detectors are dis-
played.
The code names of the sensors and the detectors which are active
are highlighted.
9-3
Purpose Operation test/check
Function (Purpose) Used to check the operations of the load in
the paper reverse section (duplex section)
and its control circuit.
Section Duplex
Operation/Procedure
1) Select the item to be operation checked with the touch panel
key.
2) Press [EXECUTE] key.
The selected load performs the operation.
When [EXECUTE] key is pressed, the operation is terminated.
*: Not used, but the button is displayed.
10
10-1
Purpose Operation test/check
Function (Purpose) Used to check the operations of the toner
supply mechanism (toner motor) and the
related circuit.
Section Process (Developing)
Operation/Procedure
1) Select a target of the operation check with the touch panel key.
When [ALL] key is pressed, all the items are selected.
2) Press [EXECUTE] key.
The selected load operation is performed for 10 sec.
When [EXECUTE] key is pressed, the operation is terminated.
This simulation must be executed without installing the toner car-
tridges.
If this simulation is executed with the toner cartridges installed,
toner will be forcibly supplied to the developing unit, resulting in
overtoner.
If this simulation is erroneously executed with the toner cartridges
installed, overtoner state may be deleted by making a few black
background copy in the single color copy mode of the target color.
S TC2 HEAVY2 CL Secondary transfer bias
adjustment value Color
Heavy paper 2
51 - 255 83 83
T TC2 HEAVY2 BW
Black/
White
51 - 255 69 69
U TC2 HEAVY3 CL Color
Heavy paper 3
51 - 255 83 83
V TC2 HEAVY3 BW
Black/
White
51 - 255 69 69
W TC2 OHP CL Color
OHP
51 - 255 69 69
X TC2 OHP BW
Black/
White
51 - 255 69 69
Y TC2 ENVELOPE CL Color
Envelope
51 - 255 69 69
Z TC2 ENVELOPE BW
Black/
White
51 - 255 69 69
AA TC2 THIN CL Color
Thin paper
51 - 255 96 103
AB TC2 THIN BW
Black/
White
51 - 255 96 103
AC TC2 GLOSSY CL Color
Gloss paper
51 - 255 83 83
AD TC2 GLOSSY BW
Black/
White
51 - 255 69 69
AE TC2 CLEANING
Secondary transfer
cleaning bias
adjustment value
Cleanig process (negative pole) 51 - 255 59 59
AF TC2 CLEAN LOW SPD Low speed print mode 0 - 255 26 26
AG TC2 CLEAN MIDDLE SPD Middle apeed print mode 0 - 255 26 26
AH TC2 CLEAN CLEANING Cleaning bias (positive pole) 0 - 255 102 102
AI PTC LOW SPEED CL
PTC current adjustment
value
Color
Low speed 51 - 255 73 73
AJ PTC MIDDLE SPEED CL Middle apeed 51 - 255 73 73
AK PTC LOW SPEED BW
Black/
White
Low speed 51 - 255 73 73
AL PTC MIDDLE SPEED BW Middle apeed 51 - 255 73 73
AM CASE VOLT LOW CL
PTC voltage adjustment
value
Color
Low speed 0 - 255 0 0
AN CASE VOLT MID CL Middle apeed 0 - 255 0 0
AO CASE VOLT LOW BW
Black/
White
Low speed 0 - 255 0 0
AP CASE VOLT MID BW Middle apeed 0 - 255 0 0
Item/Display Content Setting
value
Default value
23cpm 26cpm/31cpm
APPD1 ADU paper transport detector 1
APPD2 ADU paper transport detector 2
DSW_ADU ADU paper guide open/close detector
Display Content
ADUC1 ADU transport clutch 1 (*)
ADUM ADU motor
ADUGS ADU gate solenoid (26cpm/31cpm)