Sharp AR-250 Скачать руководство пользователя

Страница: 39 / 196

In the case of other models

Insert two projections of the toner cartridge into the notches of the
toner supply port.

5) Move the toner cartridge in the arrow direction until it stops.

In the case of AR-501/505/507

In the case of other models

6) In the case of AR-501/505/507

Pull the lever in the direction of the arrow until it breaks off.
Then pull the lever in the direction of the arrow to remove the
seal.

In the case of other models

Take off the seal end and slowly remove it.

When removing the seal, hold and fix the toner cartridge.

7) Tap the top of the toner cartridge several times.

This is to shake off toner attached to the side surface of the toner
cartridge.

8) Move the empty toner cartridge in the arrow direction and remove

it.

9) Push the toner box to the original position, and put the toner box

lever to the original position.

Sealing tape

4 – 8

7/13/2000

Содержание AR-250





































































































































































































Результаты поиска

Содержание AR-250

Отзывы:

Похожие инструкции для AR-250

Бренды по названию

Популярные бренды

Sharp AR-250, Руководство по обслуживанию

Результаты поиска

Содержание AR-250

Отзывы:

Похожие инструкции для AR-250

Бренды по названию

Популярные бренды