background image

1

Safety Information

Model No.

Introduction

This manual contains detailed instructions and notes on the operation and use of this machine. For your
safety and benefit, read this manual carefully before using the machine. Keep this manual in a handy
place for quick reference.

Power Source

120 V, 60 Hz, 11 A or more

Please be sure to connect the power cable to a power source as above.

Laser Safety:

This machine is considered class I laser device, safe for office/ EDP use. The machine contains 7 mil-
liwatt, 645 - 660 nanometer wavelength, AlGaInP laser diodes. Safety precautions and interlock mech-
anisms have been designed to prevent any possible laser beam exposure to the operator.

Important

Contents of this manual are subject to change without prior notice. In no event will the company be li-
able for direct, indirect, special, incidental, or consequential damages as a result of handling or oper-
ating the machine.

Caution:

Use of controls or adjustments or performance of procedures other than those specified in this manual
might result in hazardous radiation exposure.

Do not copy or print any item for which reproduction is prohibited by law.

Copying or printing the following items is generally prohibited by local law:

bank notes, revenue stamps, bonds, stock certificates, bank drafts, checks, passports, driver's licenses.

The preceding list is meant as a guide only and is not inclusive. We assume no responsibility for its
completeness or accuracy. If you have any questions concerning the legality of copying or printing cer-
tain items, consult with your legal advisor.

Two kinds of size notation are employed in this manual. With this machine refer to the inch version.

For good print quality, the supplier recommends that you use genuine toner, maintenance kits and parts
from the supplier.

The supplier shall not be responsible for any damage or expense that might result from the use of con-
sumables (toner, maintenance kits and parts) other than genuine consumables from the supplier with
your office products.

Some illustrations in this manual might be slightly different from the machine.

Certain options might not be available in some countries. For details, please contact your local dealer.

GaiaP2L_Safety_F-EN_FM_forPaper.book  Page 1  Monday, July 2, 2007  6:34 AM

Summary of Contents for Aficio SP C400DN

































































































































































































































































































































































































































































































































































































































Reviews: