SFA SANIFOS 110, Руководство по установке

Страница: 136 / 193

136
UK
5. Inspect the hydraulic parts and shredding blades. Clean them if necessary.
6. Clean the tank
8. MAINTENANCE
8.2 Maintenance and inspection operations
In accordance with EN 12056-4, pumping stations must be maintained and repaired to ensure the proper disposal of wastewater and to detect
and eliminate malfunctions at an early stage.
The proper functioning of pumping stations must be checked by the user once a month by observing at least two operating cycles.
The inside of the tank should be checked from time to time and deposits, especially around the level sensor, should be removed, if necessary
In accordance with EN 12056-4, maintenance of the pumping station must be performed by qualified staff. The following intervals should not
be exceeded:
• 3 months for pumping stations for industrial use
• 6 months for pumping stations for small communities
• 1 year for domestic pumping stations
8.3 Maintenance contract
As with any technical, high-performance equipment, SANIFOS
®
pumping stations must be maintained to ensure a sustainable level of
performance. We recommend you take out a maintenance contract with a qualified company to carry out regular inspection and maintenance
work. For more information, please contact us.
➜
The current is not cut. Risk of electric shock!
➜
Disconnect the plug or disconnect the electrical conductors and take measurements
➜
Pumped fluids harmful to health. Dangerous for people and the environment!
➜
Pumping stations used to discharge fluids that may be harmful to health must be decontaminated.
If necessary, wear a mask and protective clothing.
Work performed on the pumping station by unqualified staff. Risk of injury!
➜
Repairs and maintenance must be performed by specially trained staff.
➜
Observe the safety and basic instructions.
Pumped fluids harmful to health. Dangerous for people and the environment!
➜
Pumping stations used to discharge fluids that may be harmful to health must be decontaminated.
If necessary, wear a mask and protective clothing.
Work on the pumping station without adequate preparation.
Risk of injury!
➜
Properly stop the pumping station and secure it against inadvertent operation.
➜
Close the inlet and discharge valves.
➜
Drain the pumping station.
➜
Close any auxiliary connections.
➜
Allow the pumping station to cool to room temperature.