SEW-Eurodrive Movigear Performance MGF**-DFC-C Series, Руководство по эксплуатации

Страница: 354 / 416

11
Technical data and dimension sheets
Design notes for gear units with hollow shaft and key
Operating Instructions – MOVIGEAR
®
performance
354
Dimensions, tightening torques and part numbers for MGFA.2-..-C/MGFA.4-..-C
The retaining screw [2] must be tightened to the tightening torque MS given in the fol-
lowing table.
Gear unit
type D
H7
DK
1)
L8 C7 L17 L18 F U L15
+2
Retaining
screw [2]
from the as-
sembly/
disassembly
kit
MS Installa-
tion/re-
moval kit
mm mm mm mm mm mm mm mm mm ISO 4017 Nm Part num-
ber
MGFA.2-..-C 20 20 84.6 16 35 55 1 6
2)
16 M6 × 25 - 8.8 8 06436838
25 25 83.8 16 35 55 1 8
2)
22 M10 × 35 -
8.8
20 06436846
30 30 83.8 16 35 55 1 8
2)
22 M10 × 35 -
8.8
20 06436854
35 35 80 18 45 45 1 10
2)
28 M12 × 45 -
8.8
20 06436862
40 40 89 13 35 55 1 12
3)
36 M16 × 50 -
8.8
40 –
4)
MGFA.4-..-C 30 30 107.3 16 40 60 1 8
2)
22 M10 × 35 -
8.8
20 06436854
35 35 105.6 18 40 60 1 10
2)
28 M12 × 45 -
8.8
20 06436862
40 40 105.5 18 40 60 1 12
2)
36 M16 × 50 -
8.8
40 06436870
1) Up to a distance of at least 1.5 × DK, the diameter of the customer shaft must be ØDKh6, and with the
other length ØDKg6.
2) For keyway types: DIN6885-1 (domed type)
3) For keyway types: DIN6885-3 (low type)
4) Not with the assembly/disassembly kit by SEW‑EURODRIVE
25945475/EN – 04/2019