SEPTENTRIO PolaRx5TR Скачать руководство пользователя страница 400

Страница: 400 / 512

4 SBF Reference

Misc

Bit ﬁeld containing miscellaneous ﬂags:
Bit 0:

In DGNSS or RTK mode, set if the baseline points to the base

station ARP. Unset if it points to the antenna phase center, or if

unknown.

Bit 1:

Set if the phase center offset is compensated for at the rover,

unset if not or unknown.

Bit 2:

Proprietary.

Bit 3:

Proprietary.

Bits 4-5: Proprietary.
Bits 6-7: Flag indicating whether the marker position reported in this

block is also the ARP position (i.e. whether the ARP-to-marker

offset provided with the

setAntennaOffset

command is zero

or not)

Unknown

The ARP-to-marker offset is zero

The ARP-to-marker offset is not zero

Reserved

Reserved for future use.

AlertFlag

Bit ﬁeld indicating integrity related information:
Bits 0-1: RAIM integrity ﬂag:

RAIM not active (integrity not monitored)

RAIM integrity test successful

RAIM integrity test failed

Reserved

Bit 2:

set if integrity has failed as per Galileo HPCA (HMI Probability

Computation Algorithm)

Bit 3:

set if Galileo ionospheric storm ﬂag is active

Bit 4:

Reserved

Bits 5-7: Reserved

Datum

255

This ﬁeld deﬁnes in which datum the coordinates are expressed:

WGS84/ITRS

19:

Datum equal to that used by the DGNSS/RTK base station

30:

ETRS89 (ETRF2000 realization)

31:

NAD83(2011), North American Datum (2011)

32:

NAD83(PA11), North American Datum, Paciﬁc plate (2011)

33:

NAD83(MA11), North American Datum, Marianas plate (2011)

34:

GDA94(2010), Geocentric Datum of Australia (2010)

35:

GDA2020, Geocentric Datum of Australia 2020

36:

JGD2011, Japanese Geodetic Datum 2011

250: First user-deﬁned datum

251: Second user-deﬁned datum

NrSV

255

Total number of satellites used in the PVT computation.

WACorrInfo

Bit ﬁeld providing information about which wide area corrections have

been applied:
Bit 0:

set if orbit and satellite clock correction information is used

Bit 1:

set if range correction information is used

Bit 2:

set if ionospheric information is used

Bit 3:

set if orbit accuracy information is used (UERE/SISA)

Bit 4:

set if DO229 Precision Approach mode is active

Bits 5-7: Reserved

ReferenceId

65535

This ﬁeld indicates the reference ID of the differential information used.

In case of DGPS or RTK operation, this ﬁeld is to be interpreted as the

base station identiﬁer. In SBAS operation, this ﬁeld is to be interpreted as

the PRN of the geostationary satellite used (from 120 to 158). If multiple

base stations or multiple geostationary satellites are used the value is

set to 65534.

MeanCorrAge

0.01

65535

In case of DGPS or RTK, this ﬁeld is the mean age of the differential cor-

rections.

In case of SBAS operation, this ﬁeld is the mean age of the ’fast correc-

tions’ provided by the SBAS satellites.

In case of PPP, this is the age of the last received clock or orbit correction

message.

400

Содержание PolaRx5TR

































































































































































































































































































































































































































































































































Результаты поиска

Содержание PolaRx5TR

Отзывы:

Похожие инструкции для PolaRx5TR

Бренды по названию

Популярные бренды

SEPTENTRIO PolaRx5TR, Справочное руководство

Результаты поиска

Содержание PolaRx5TR

Отзывы:

Похожие инструкции для PolaRx5TR

Бренды по названию

Популярные бренды