background image

 

 

41

5.1. Game 

outline 

 

  Insert a coin and a credit will be added to the credit indicator below the screen. When enough coins 

have been entered for one play, the "INSERT COIN(S)" message below the screen will change to 
"PRESS START BUTTON," and both START buttons will flash. 

 

NOTE: The maximum number of credits that can be counted at once is "24." Any coins inserted after 24 
credits have been counted will not be counted as credits, nor will they be refunded. However, they will be 
counted as inserted coins on the data display and by the coin meter. 

 

  A player plays on the left (Player 1) or the right (Player 2) by pressing the START button on that side. 

Pressing the START button begins the game. 

 

  When the game starts, a demo plays and the stage title is displayed before switching over to game play. 

 

Life, loaded bullets remaining and grenades are shown at the bottom left of the screen for the player on the 
left (Player 1). Life, loaded bullets remaining and grenades are shown at the bottom right of the screen for 
the player on the right (Player 2). 

 

 

 

The gun holds 30 shots. When empty, the message "RELOAD" will appear on the screen. 
The player can reload the gun by gently shaking it or by pointing it outside of the screen. Gently shaking it 
or pointing it outside of the screen even if bullets remain in the gun can reload the gun. 

 

Only the displayed number of grenades may be 
used. This number may be increase by collecting 
grenades during each stage. A maximum of 5 
grenades may be held at once. Also, if only 2 or 
less grenades remain upon clearing a stage, the 
player will automatically start the next stage with 3 
grenades. 

 

 
 
 

Содержание HOUSE OF THE DEAD 4 SUPER DELUXE





















































































































































Отзывы: