Sega HOUSE OF THE DEAD 4 SUPER DELUXE, Руководство пользователя

Страница: 21 / 148

18
Step 4 (AC wiring and connection procedure)
•
Be sure that the machine is not connected to the mains supply before attempting this
operation
•
QUALIFIED SERVICE PERSONNEL should only carry out this operation.
Be sure to independently use the power supply socket outlet equipped with an Surge
Suppressor. Using a power supply without a Surge Suppressor can cause a fire when
electric leakage occurs.
Ensure that the "accurately grounded indoor earth terminal" and the earth wire cable
are available (except in the case where a power cord plug with earth is used). If the
grounding work is not performed appropriately, customers can be subjected to an
electric shock, and the product may not function properly.
Ensure that the power cord and earth wire are not exposed on the surface (passage,
etc.). If exposed, they can be caught and are susceptible to damage. If damaged, the
cord and wire can cause electric shock and short circuit accidents. Ensure that the wire
is not in the customer's way and that the wiring has protective insulation.
After wiring the power cord on the floor, be sure to protect the power cord. An exposed
power cord is susceptible to damage and may cause an electric shock.
When using the earth terminal from Terminal width:12mm the AC unit for the product,
always use an earth wire with a round earth terminal as shown in the diagram and be
sure to connect it correctly. Never use simply stripped wires or any other form of
inappropriate connection method.
The AC unit is located at the base of the back of the DLP. The AC unit has the following
switches/connectors.
The main switch
An inlet for the power cable.
The power cable included with the product has an earth wire inside.
Connect the AC unit to the power cable and then plug it into a socket that has an earth terminal. If you do
not have access to a socket with an earth terminal you must earth the product in another way, e.g. by
connecting the AC unit's earth terminal and an earth device via a separate earth cable. If you are using a
commercial conversion adaptor to provide the power you must connect the adaptor's earth terminal to an
earth terminal that is definitely earthed.