1
1.
Before using this product
To ensure the safe usage of the product, be sure to read the following before using the product. The following
instructions are intended for the use of QUALIFIED SERVICE PERSONNEL ONLY. After carefully reading and
sufficiently understanding the instructions should any activity be carried out on the product. Only qualified service
personnel should carry out maintenance on the product.
Terms such as WARNING!, CAUTION, and IMPORTANT! Are used where an explanation is given which requires
special attention, depending on the potential risk. SEGA is not responsible for injury or damage caused by use in a
manner contrary to the instructions stated in this document. In order to prevent accidents warning stickers and printed
instructions are applied in the places where a potentially hazardous situation relating to the product could arise. Be sure
to comply with these warnings.
Indicates that mishandling the product by disregarding
this warning will cause a potentially hazardous
situation which can result in death or serious injury.
Indicates that mishandling the product by disregarding this
caution will cause a potentially hazardous situation which
can result in personal injury and or material damage.
This is cautionary information, which should be complied with when handling the product.
Indicates that mishandling the product by disregarding this will cause a potentially hazardous
situation, which may not result in personal injury but could damage the product.
Be sure to turn off the power and disconnect from the mains supply before working on the machine.
Ensure that the correct fuse(s) is fitted to the machine.
Details of the correct fusing of the machine are enclosed in the Service Manual.
Ensure that only qualified Service Engineers perform any maintenance work on the machine.
Specification changes, removal of equipment, conversion and/or addition, not designated by SEGA are not permitted
and will invalidate this product’s CE conformity.
The parts of the product also include any warning labels or safety covers for personal protection etc. A potential
hazard will be created if the machine is operated while any parts have been removed. Should any doors, lids or
protective covers be damaged or lost, do not operate the product. SEGA is not liable in any whatsoever for any injury
and/or damage caused by specification changes not designated by SEGA.
Before installing the product, check for the Electrical Specification Sticker, SEGA products have a sticker on which
the electrical specifications are detailed. Ensure that the product is compatible with the power supply voltage and
frequency requirements of the location in which the machine is to be installed.
When installing this equipment ensure the socket outlet is near the machine and is easily accessible.
Install and operate the machine only in places where appropriate lighting is available, allowing warning stickers to be
clearly read.
To ensure maximum safety for customers and operators, stickers and printed instructions describing potentially
hazardous situations are applied to places where accidents could occur. Ensure that where the product is operated
has sufficient lighting to allow any warnings to be read. If any sticker or printed warning is removed or defaced, do
not operate the machine, until an identical item has replaced it.
When handling the monitor, be very careful. (Applies only to product with monitor)
Some of the monitor (TV) parts are subject to high-tension voltage. Even after turning off the power some
components are still occasionally subject to high-tension voltage. Qualified service engineers should perform monitor
repair and replacement only.
In cases where commercially available monitors and printers are used only the contents relating to this product are
stated in this manual. Some commercially available equipment has functions and reactions not stated in this manual.
Read this manual in conjunction with the specific manual of such equipment.
Descriptions contained herein may be subject to change without prior notification.
The contents described herein are fully prepared with due care. However, should any question arise or errors be
found please contact SEGA.
Содержание HOUSE OF THE DEAD 4 SUPER DELUXE
