Sega HOUSE OF THE DEAD 4 SUPER DELUXE, Руководство пользователя

Страница: 33 / 148

30
3.8. Assembly check
QUALIFIED SERVICE PERSONNEL should only carry out this operation.
Use Test Mode to check that the product has been assembled correctly and that the game board, other
connected boards and all output devices are working correctly.
Perform this test in Test Mode as follows.
See "9-2 System Test Mode" for tests (1) to (4) below and "9-3 Game Test Mode" for test (5) to (7).
(1) Information Display Screen
Selecting SYSTEM INFORMATION, STORAGE INFORMATION or JVS TEST from the SYSTEM TEST
Mode menu screen will displayed system information, game information and information concerning the
JVS I/O board attached to the LINDBERGH board.
If all information is displayed correctly then the LINDBERGH board is running smoothly.
(2) JVS Input Test Screen
Selecting INPUT TEST on the JVS TEST Screen will display input data for the JVS I/O board.
For this product this is the screen to test the coin switches. Insert a coin to perform a test.
If the display nest to the switch changes the switch and connections are working correctly.
(3) Monitor Test Screen
Selecting MONITOR TEST on the SYSTEM TEST Mode menu screen will display a screen that allows the
monitor output to be tested.
The projector comes adjusted from the factory but still use this TEST Screen to make sure that further
adjustment is not required. If required, see chapter 11 for information on adjusting the projector.
(4) Speaker Test Screen
Selecting SPEAKER TEST from the SYSTEM TEST Mode menu screen will display a screen that allows
the speaker output to be tested.
The speakers attached to the machine will output a test sound. Use this to check that all speakers are
outputting correctly.
(5) Input Test
Selecting INPUT TEST from the GAME TEST Mode menu screen will display a screen that allows input
devices to be tested.
Press each switch to check that each is working. If the display next to the input device changes to on "ON"
or the values displayed change smoothly then that input device and all connections with it are working
correctly.
Input Test Screen