22
Use a soft, dry cloth to wipe off any dirt or marks on the DVD drive.
If you need to use a cleaning agent, always use a "neutral" agent diluted in water.
Never use products or cleaning agents containing benzene, alcohol, thinners, etc.
Do not touch the lens inside the DVD drive. Doing so may prevent it from reading
accurately.
The chip components on IC boards can be damaged by electrostatic discharge from the
human body. Before handling an IC board, always neutralize any static charge in the
body by touching a grounded metal surface.
Handling the DVD-ROM Disc
Do not use a DVD-ROM with a damaged front. This may cause a malfunction.
Insert the DVD-ROM into the DVD drive with the label facing upwards.
Do not get fingerprints or dust particles on the disc. Contaminated discs may lower
audio and video quality, and may result in read malfunctions.
When cleaning the disc, do not use volatile chemicals (benzene, thinner, etc.), cleaning
sprays, or antistatic agents.
Do not use a cracked, warped, or damaged disc. Do not attach papers or seals onto the
disc to avoid scratching it. Do not use a disc with signs of peeled seals, tape, etc. If
such a disc is placed in the DVDROM drive, malfunctions, such as the inability to
remove the disc from the drive, may result.
When cleaning a heavily contaminated disc, use a clean cloth that has been soaked in
water and squeezed. After wiping, remove any remaining moisture with a clean, dry
cloth.
How to Hold a Disc
When handling a disc, be careful not to contaminate it
with your fingerprints.
With both hands:
Put your thumbs and forefingers on 4 opposite sides
of the disc.
With one hand:
Insert your forefinger into the center hole, while
placing your thumb and middle finger on opposite
sides of the disc.
Содержание HOUSE OF THE DEAD 4 SUPER DELUXE
