115
13. Troubleshooting.
13.1. Problems not involving the Game Board.
In case a problem occurs, first check wiring connector connections.
In order to prevent electric shock and short circuit, be sure to turn power off before
performing work.
Be careful not to damage the wires. Damaged wires may cause electric shock or
short circuit or present a fire risk.
After removing the cause of the functioning of the Circuit Protector, reinstate the
Circuit Protector. Depending on the cause of the functioning, using the Circuit
Protector as is without removing the cause can cause generation of heat and fire
hazard.
Problem Cause
Countermeasure
Power is not supplied.
Securely insert the power plug
into the plug socket.
Power supply/voltage is not
correct.
Make sure that power
supply/voltage is correct.
With Main SW ON, no activation.
The Circuit Protector functioned
due to a momentary electrical
overload.
After eliminating the cause of
overload, reinstate the AC Unit's
Circuit Protector
The color on the projector screen
is incorrect.
Image adjustment is not
appropriate.
Adjust appropriately
Sound volume adjustment is not
appropriate.
Adjust sound volume
No sound is emitted.
Board and Amplifier
malfunctioning
Perform the sound test and
confirm
Содержание HOUSE OF THE DEAD 4 SUPER DELUXE
