52
|
MAGIQTOUCH & MAGIQCOOL MODELS
TECHNICAL BULLETIN:
A02/09 CIRCUIT PROTECTION FOR ICON
Subject: Circuit Protection Icon EXH210 & EZH215
Bulletin Number: A02/09
Region: Australia
Author: Technical Support 1300 650 399
Date: 27/01/2009
ELECTRICAL CIRCUIT PROTECTION
INSTALLATION REQUIREMENTS
In order to assist in preventing any
unnecessary inconvenience to our Customers,
Seeley International would like to comment
on the circuit protection allowances that must
be adhered to when installing Breezair Icon
Coolers.
It is a requirement of Seeley International
that all Coolers be wired a dedicated power
circuit to the distribution board.
We have received field feedback on various
imported brands of circuit breakers. The
feedback indicates that high ambient
temperature conditions can cause a de rating
effect that causes premature tripping at much
lower currents than their ratings indicate.
The maximum current draw for the EXH210
and EZH215 is 9.6amps. Therefore, when
selecting circuit protection devise for the
EXH210 and EZH215, provisions must
be made to allow for the varying thermal
tolerances.
Please be aware that is a Warranty Service
call reveals no fault with the Cooler charges
will apply, as external Electrical and
Plumbing Services are not covered by the
manufacturer’s warranty.
We thank you for your support in this matter.
Seeley International has a policy of
continuous improvement in all areas. This
is one of the many product improvements
and enhancements that we are making
to our large range of cooling and heating
products.
TECHNICAL BULLETIN