Sea Recovery SRC Ultra Whisper Compact 200, Руководство пользователя

Страница: 48 / 299

Sea Recovery Ultra Whisper Rev. A
H. COMPONENT MATCHING:
a. Three components must be properly matched in order to attain acceptable operating pressure limits and
resulting Product Water Production Limits. The ETD [17], the Reverse Osmosis Membrane Element [20], and
the Feed Pump [6] Output Flow of water must all be matched. Upon leaving Sea Recovery’s factory at the
time of shipment these components have been matched and tested together.
If the initial Sea Recovery customer (Distributor, Dealer, or Boat Builder) has mistakenly interchanged one or
more of these components this will cause a mismatch resulting in insufficient operating pressure, insufficient
product water flow, excessive operating pressure, or excessive product water flow.
Prior to installation, please check to ensure that the three components are properly matched. Refer to the
following:
ETD [17] SIZE CODE LOCATION: FEED PUMP [6] SIZE CODE LOCATION:
INLET
OUTLET
SUCTION VACUUM/PRESSURE
PICK UP TUBE FITTING
FEED WATER PUMP
FLOW RATE CODE
5
B-xx
BACK OF ETD
HIGH PRESSURE PICK UP
RECOVERY RATE CODE
R.O. MEMBRANE ELEMENT [20] SIZE CODE AND PRESSURE VESSEL SIZE CODE
IN RELATIONSHIP TO LENGTH:
INLET FROM
ETD PORT "P"
OUTLET TO
ETD PORT "R"
PRODUCT
WATER
OUTLET
R.O. Membrane Element
Pressure Vessel
PRESSURE VESSEL SIZE CODE
SIZE CODE "A" = 27.88 Inch / 708 mm Ultra Whisper 200
SIZE CODE "B" = 37.83 Inch / 961 mm Ultra Whisper 300
SIZE CODE "C" = 46.78 Inch / 1189 mm Ultra Whisper 400, 500, & 600
R.O. MEMBRANE ELEMENT SIZE CODE
SIZE CODE "A" = 21 Inch / 533 mm Ultra Whisper 200
SIZE CODE "B" = 31 Inch / 787 mm Ultra Whisper 300
SIZE CODE "C" = 40 Inch / 1016 mm Ultra Whisper 400, 500, & 600
Section 2 Page 9 of 68