SDKELI KS06 AOPD Series, Руководство по эксплуатации

Страница: 63 / 64

- 59 -
Troubleshooting of emitter/receiver
Sheet 5.3
Phenomena of failure Cause Solution
All the indicators in emitter or
receiver are off
Transmission cable failure
Check and repair transmission
cable and the wiring
Emitter or receiver failure
Replace emitter or receiver with
the same specification one
On the receiver, the red status
indicator is on, and the green
status indicator is off
Bad beam focusing Make the beam focusing well
The filter plate surface of emitter
or receiver is dirty Wipe it with a clean, soft cotton
yarn
Emitter or receiver failure
Replace emitter or receiver with
the same specification one
The fault
indicator
Only one red light is on Bad beam focusing Make the beam focusing well
Only two red lights are
on
OSSD wiring error check the wiring
Only one red light and
one yellow light are on
Emitter or receiver failure
Replace emitter or receiver with
the same specification one