SDKELI KS06 AOPD Series, Руководство по эксплуатации

Страница: 44 / 64

- 40 -
5) T-groove mounting (TC)
Emitter/receiver contains T-groove itself, when the space is too limited to adopt the three installation
forms mentioned above, T-groove installation is another solution for consideration. Fix Emitter/Receiver
on machine bed by T-bolts and L-brackets. The form of installation is showing in Fig2.12. The procedures
are as follows:
1. Select proper installation position on the machine bed piece, drill and tap as shown in Fig2.12.C.
2. Fix the L-bracket onto the machine bed piece by one M6×16 inner hexagon screw.
3. Tightly fix the emitter and receiver onto the L-bracket by T-bolts and M6 hexagon nuts.
4. Adjust the position of emitter and receiver, make them parallel, corresponding and aligned.
5. Fasten all mounting screws after start-up test.
Sheet2.2 Formula of Dimension D, F and H
Fig 2.12 T-groove mounting (TC)
①
Emitter/Receiver
②
L-bracket
③
M6×16 inner hexagon screw, Φ6 elastic/plain washer
④
M6 hexagon nut, Φ6 elastic/plain washer
⑤
T-bolt-14.5
Fig 2.12.C Fig 2.12.B Fig 2.12.A