SDKELI KS06 AOPD Series, Руководство по эксплуатации

Страница: 59 / 64

- 55 -
Section4 Maintenance
WARNING
Perform daily and 6-month inspection for KS06. Otherwise, the system may fail to work properly,
resulting in serious injury.
Do not try to disassemble, repair, or modify this product. Doing so may cause the safety functions
to stop working properly.
Hot plugging for the connectors of KS06 is forbidden!
CAUTION
To ensure safety, keep a record of the inspection results. When the user is a different person from
those who installed or designed the system, he/she must be properly trained for maintenance.
4.1.Inspection at startup and when changing operators
□There is no approach route other than through the detection zone of KS06.
□Part of the operator's body always remains in the detection zone of KS06 when working around the
machine's hazardous part.
□The actual safety distance is equal to or greater than the calculated value.
□Reflective objects are not installed in prohibited zones.
□There must be no dirt on nor damage to the optical surface.
□The test piece is not deformed, fulfills requirements of the detection capability.
□When the power of KS06 is turned ON while nothing is in the detection zone, it must output light-
passing state in 1s.
□The light curtain retains light-shaded state while the test piece is moved around in the detection zone.
Fig 4.1 Schematic Diagram of the Test Method of the Test Piece in the Detection Area