Schulze PRETREATmaker LINE 11-6, Инструкция по эксплуатации

Страница: 8 / 20

10. If all nozzles don’t work identically, press the water button on the touch screen display (picture 5) and hold it until the water starts
flowing from the nozzles and next repeat the procedure given in points 7-9. The procedure given in points 7-9 must also be repeated if the
precoating container has been empty, so the pump must fill in the ducts again.
3 . Working with the machine
3.1 Usage of the machine
PRETREAT maker LINE is self- contained industrial pretreatment device for the full process of preparing garments including
preatreatment, drying and pre-pressing. It is destined for automatic application of precoat for white ink in printers directly printing on fabrics.
The device is equipped with 5 nozzles. Application of the precoat is executed directly over the fabric. The containers may not be filled with
other liquids.
3.2 Starting the working procedure
T-shirt has to be placed on the base plate, which is situated in the operators’ area (picture 1A) . After pushing the START
button the movement of the plates will start (picture 1B). The plate with the t-shirt moves to the pretreatment station. While it gets covered
automatically with the precoating, the operator is placing another t-shirt on the base plate that arrives to his work station. After pushing the
start button again the first plate with t-shirt moves automatically to the drying tunnel. Every time after pushing the START button the plates
will will move by one station to the right. Depending on model, there are 6 or 4 stations in the drying tunnel. After the drying process, the
first base plate with the t-shirt arrives to the heat press station and gets pressed. After pushing the START button again the first base plate
with the t-shirt arrives to the operators’ station and the process is finished. The t-shirt is covered with the precoating, dried and pressed.
There can be 11 t-shirts in a machine at a time in 11-6 Version or 7 t-shirts in 7-4 Version.
3.3 Programming and functions of the machine
1. Setting the temperature of the air flow
After touching the field, the keyboard will appear on the display. Max. temperature of the air flow is 250ºC. Recommended
temperature is 185ºC.
2. Current power consumption of the air flow
Power consumption level, expressed as percentage. While warming up the drying tunnel, the power consumption reaches 100%.
After the programmed temperature is reached, the power consumption is reduced till around 70%. Power consumption level depends
on the external conditions and on the number of t-shirts that are currently in the drying tunnel.
3. Current temperature of the air flow
Current temperature of the hot air is shown on the display.
Version 18.04
8/20