Schulze PRETREATmaker LINE 11-6, Инструкция по эксплуатации

Страница: 10 / 20

30. Carriage speed
Carriage speed expressed as percentage. After touching the field, the keyboard will appear on the display. The carriage speed can
be adjusted between 50% and 150%.
31. Pressure of the nozzles
After touching the field, the keyboard will appear on the display. The pressure of the nozzles can be adjusted between 50% and
150%.
32. Rotating the t-shirt
There is a possibility to set the position of the t-shirt on the display (beginning of printing on top of the plate or beginning of printing on
bottom of the plate). Touch the icon to change the position of the t-shirt.
33. Single/ double precoat
After touching the icon single or dual application of the precoating can be selected.
34. Water
After touching the icon, the nozzles get rinsed with water from the container.
35. Precoating
In order to fill the tubes with the precoating push and hold several times precoating icon.
36. Settings
After touching the icon the settings menu will show up on the screen.
37. PRETREATmaker ON / OFF
Touch the icon to switch on or off the pretreatment station..
38. Movement (left)
After touching the icon, the base plates will move by one position to the left.
39. Movement (right)
After touching the icon, the base plates will move by one position to the right.
40. Current status of the machine
Depending on the status of the machine the field changes colour.
greens – machine is ready
yellow – machine is working
red – malfunction of the machine
Starting the machine
Check the working plates (stations), if they are free of items. They can get damaged or cause damages of the machine if the device start
working (melt, burn). The compressed air has to be connected to the device. Check if all covers are in the right place, connected to the
machine and if the switches of the press and pretreatment machine are switched on.
After turning the main switch on and setting up all configurations (time, temperature, modus, etc.), touch the ON icon on the control panel
to activate the machine.
SETTINGS MENU
41. Pump cleaning
After touching the icon follow the instructions showed on the screen.
42. Config file via USB port
In order to import the settings to an external device or export the previous saved setting to the machine press the right icon.
43. Temperature adjustment
In the PRETREATmaker LINE it is possible to adjust the temperature of the heating plates and the heating elements to its original
settings from -15ºC to +15ºC.
Version 18.04
10/20