Schulze PRETREATmaker LINE 11-6, Инструкция по эксплуатации

Страница: 16 / 20

4.5 Instructions for replacement, cleaning and storage of the nozzles
Replacement:
1. Open the front cover (picture 1).
2. Turn the nozzle left and then pull it out down (picture 2)
3. Place a new nozzle and fix it in the machine.
Cleaning:
1. The nozzle may be cleaned in an ultrasonic cleaner (picture 3).
2. To clean the nozzles please use destilled water or jewerlly cleaner.
3. Fill the cleaner with some water.
4. Put the nozzles into the cleaner
5. Turn it on for 7 minutes (max. 15 minutes).
6. After that please take them out to dry.
Storage:
To storage the nozzles please use clean distilled water. Never leave the nozzles exposed to air when there are remains of precoating on
the nozzles. Store the nozzles in clean, distilled water and clean them at least once a week.
4.6 Instructions for replacement of the fuse in the pretreatment station
In case the machine is not working after it has been switched on, check the safety fuse. The safety fuse (6A) is located in the back side of
the pretreatment station. In order to replace it, turn off the machine and pull out the power plug. Now open the holder with the fuses
(picture 1). There are 2 fuses: fuse A and fuse B. Fuse A is connected to the machine – fuse B is a spare fuse. Remove both fuses from
the holder (picture 3). Now insert fuse B in a place of the fuse A and close the fuse holder.
4.7 Activation of the main fuse
If the machine is not working after it has been switched on check the main fuse
of the machine. The main fuse is situated in the control box. Open the cover
of the control box and if needed switch the main fuse on (picture).
4.8 Instructions for replacement of the filter
If the precoating dosage is not smoothly carried out check the filter and if necessary – replace it. Open the side cover. The filters are in
the containers with precoating. Remove the tube from the container and replace the filter.
Version 18.04
16/20