Description of Functions
42 / 96
EN
· 30.30.01.02851 · 01 · 03/22
Press and hold the
and
buttons simultaneously for at least 3 seconds.
The “SP1” and “SP2” LEDs flash.
Deactivating Manual Mode
The area gripper is in manual mode.
Briefly press the
and
buttons at the same time.
The SP1 and SP2 LEDs cease to flash.
The device also exits manual mode when the status of the external signals changes.
When the area gripper receives an external signal, it switches to automatic mode.
Activating manual suction
The area gripper is in manual mode. The SP1 and SP2 LEDs flash.
Press the
button to activate “suction” mode.
The suction LED S lights up.
The area gripper begins to apply suction.
Deactivating manual suction
The area gripper is in suction mode.
Press the
button again.
The suction process is deactivated.
Alternatively, press the
button.
The area gripper changes to the “blow-off” state for as long as the button is pressed.
If the controller is on
, it uses the configured limit values in “manual” mode as well.
Activating and deactivating manual blow-off
The area gripper is in manual mode.
Press and hold the
button.
The blow off LED B lights up.
The area gripper blows off as long as the button is pressed.
Release the
button to end the blow off.
The blow off process is deactivated.
The blow off LED B is no longer lit.
