Product Description
16 / 96
EN
· 30.30.01.02851 · 01 · 03/22
3.3.7
End cover
The end cover has 1/8" female threaded connections. These allow an additional vacuum gauge or a vacuum switch to
be connected and a compressed air pulse to be supplied for blow-off and separation.
(The compressed air supply for separation can only be attached on the side with the marking holes.)
3.4
Function Unit
Both gripper types (FMP-i for an external vacuum generator and FXP-i with integrated vacuum generator) feature a
functional unit that also includes the controller. On grippers of type FXP-i, the plug-in ejector is connected to the end
cover with the control unit; on grippers of type FMP-i, the vacuum valve is connected.
3.4.1
Ejector Assembly
The ejector assembly for grippers FXP-i comprises the control unit and the vacuum generator. The two integrated
control valves are used to divert the compressed air according to the electrical signals. If necessary, the complete
assembly can be removed for maintenance purposes or replaced if faulty.
In this case, the information on the separately attached nameplate is required. Please specify when ordering
replacement parts, making warranty claims or for any other inquiries. The type plate is permanently attached to the
assembly and must not be removed.
1
Control and display unit (figure with optional
pentaprism)
2
Nameplate with QR code (not visible)
3
Plug-in ejector
4
End cover with control unit
5
Self-tapping fastening screws (4x)
3.4.2
Valve Assembly
The valve assembly for grippers FMP-i comprises the control unit and the vacuum valve. The two integrated control
valves are used to divert the compressed air according to the electrical signals. If necessary, the complete assembly
can be removed for maintenance purposes or replaced if faulty.
1
2
5
3
4
