Troubleshooting | 127
After attaching the option tray, and the bypass tray, you must register where to start printing
on paper loaded in each paper tray.
See section "Registration adjustment" for more information.
Have you changed the paper feed setting?
If horizontal lines are printed unaligned, print images are patchy, or black or white streaks
are printed at regular intervals, print a test pattern, then adjust the paper feed setting.
See section "Adjust Paper Feed" for more information.
Does the paper type setting match?
Make sure that the paper type setting of the printer driver matches the type of paper
loaded.
See section "Using the [Paper Tray Settings] Menu" for more information.
Have any of the inks past the “Recommended Use by Dates”?
Ink cartridges should be used prior to the “Recommended Use by Date,” preferably within
six months of being removed from their packaging. Using ink in the printer past this date
may be harmful to the unit and/or result in poor output quality.
Are you printing on the right type or wrong side of the paper?
Check that you are printing on sublimation transfer paper and that the print is on the
correct, bright white side.
See sections "Handling and Storage Precautions" and "Loadable Paper Sizes Paper" for
more information.
Is the paper loaded in the correct orientation?
Some paper cannot be loaded lengthwise depending on the size of the paper. Check the
orientation in which the paper is loaded.
See section "Loadable Paper Sizes" for more information.
Colors are not correct
If the color of the printed output differs from what is expected, refer to the following
questions:
More information specifically regarding color can be found on
Does color not match what is onscreen?
Since printed colors and screen colors are produced by different methods, a color printed
and a color displayed on a screen can have different hues even though they are the "same"
color.
Has the nozzle check been performed?
Содержание SG1000EU
Страница 1: ...Table of Contents i ...
