Setup and Installation | 57
This illustration indicates an adjustment value that is set to "-1".
9. P
ress the
[▲] or [▼]
key to display [Adjustment] then press the [OK] key
10. Press the
[▲] or [▼]
key to select a resolution from Step 5, then press the
[OK] key.
11. Select the items that you need to adjust, then press the [OK] key.
12. Enter the optimal adjustment values from Step 6, then press the [OK] key.
13. Press the [Exit] selection key once all the values have been set.
Adjust Paper Feed
If printed horizontal lines are misaligned, print images are patchy, or streaks are printed at
regular intervals, print a test pattern, then adjust the paper feed setting.
Although instructions are provided, Sawgrass recommends that the procedure to
adjust the paper feed be performed from the printer driver and not the printer
control panel.
Содержание SG1000EU
Страница 1: ...Table of Contents i ...
