Sawgrass SG1000EU, Руководство пользователя

Страница: 26 / 129

Setup and Installation | 23
Checking the power source
(mainly Europe and Asia)
SG500EU

220-240 V: 50/60 Hz 0.6 A
SG1000EU

220-240 V: 50/60 Hz 0.6 A
(mainly North America)
SG500NA

120-127 V: 60 Hz 1.0 A
Failure to follow any of the warnings below could result in fire or electric shock:

Do not use any power sources other than those that match the specifications
shown in this manual.

Do not use any frequencies other than those that match the specifications shown.

Do not use multi-socket adaptors or extension cords.

Do not touch the prongs of the power cable's plug with anything metallic.

Do not handle the power cord plug with wet hands.

The supplied power cord is for use with this printer only. Do not use it with other
appliances.

Do not use power cords that are damaged, broken, or modified. Also, do not use
power cords that have been trapped under heavy objects, pulled hard, or bent
severely.

If the power cord is damaged and its inner wires are exposed or broken, contact
Sawgrass for a replacement. Use of damaged power cords could result in fire or
electric shock.

Locate the printer as close as possible to a wall outlet. This will allow easy
disconnection of the power cord in the event of an emergency.

Be sure to push the plug of the power cord fully into the wall outlet. A partially
inserted plug may create an unstable connection that can result in unsafe buildup
of heat.

When disconnecting the power cord from the wall outlet, always pull the plug, not
the cord. Pulling the cord can damage the power cord.