Sawgrass SG1000EU, Руководство пользователя

Страница: 23 / 129

Setup and Installation | 20
Checking the Installation Area
The printer's location should be carefully chosen because environmental conditions greatly
affect its performance.
Installation Area

To avoid malfunctions, position the printer away from the following:

direct sunlight

flow of air from air conditioners or heaters

radios, televisions, or other electronic devices

areas of high/low temperature and high/low moisture

humidifying appliances

oil stoves and ammonia-emitting appliances (such as copiers)

Do not use flammable sprays or solvents in the vicinity of this printer. Also, avoid
placing these items in the vicinity of this printer. Doing so could result in fire or
electric shock.

Do not place vases, plant pots, cups, toiletries, medicines, small metal objects, or
containers holding water or any other liquids, on or close to this printer. Fire or
electric shock could result from spillage or if such objects or substances fall inside
this printer.

Be sure to locate the printer as close as possible to a wall outlet. This will allow
easy disconnection of the power cord in the event of an emergency.

Keep the printer away from humidity and dust. Otherwise a fire or an electric
shock might occur.

Do not place the printer on an unstable or tilted surface. If it topples over, an injury
might occur.

Do not place heavy objects on the printer. Doing so can cause the printer to topple
over, possibly resulting in injury.

Do not obstruct the printer's vents. Doing so may lead to a fire caused by
overheated, internal components.

Make sure the room where the printer is used is well ventilated and spacious.
Good ventilation is especially important when the printer is used heavily.