Sawgrass SG1000EU, Руководство пользователя

Страница: 32 / 129

Setup and Installation | 25
Attaching and Detaching the Bypass Tray
This section explains how to attach and detach the bypass tray.

Do not place the printer near the edge of a desk if the bypass tray is attached.
There is a risk of it falling to the floor.

Before installing or removing options, always disconnect the power cord plug from
the wall outlet.

Do not forcefully press down on the bypass tray. It may come off the printer and
paper misfeeds or positioning problems may result.
Attaching the bypass tray
1. If the printer is powered on, press and hold down the [Power] key until it turns
off and then unplug the power cord.
2. If necessary, disconnect the USB cable or Ethernet cable.
3. Take the bypass tray out of the box and remove the tape.
4. Attach the anti-topple stand and then secure it with a coin screw.
(SG1000NA/SG1000EU)
If an option tray is installed, attach the anti-topple stand to it.
5. Attach the bypass tray while pressing the tabs on each side, then push it in all
the way. Attach the bypass tray into the printer until you hear it click.

Do not place the printer on an unstable or tilted surface. If it topples over an injury
might occur.