Sawgrass SG1000EU, Руководство пользователя

Страница: 128 / 129

Troubleshooting | 127

Even after the power is turned on, the printer may remain in standby mode until it
acclimates to the room temperature. If this happens, wait until the [Power] key
stops flashing and stays lit.

For details about what conditions the printer can be used under (ambient
temperature and humidity range), see section "Checking the Installation Area" for
more information.
Printer Error
An error has occurred in the printer.
Turn the printer off, then turn it on again.

If the printer is relocated from a cold area to a warm area or the printer is placed in
a room where the temperature varies greatly, condensation may form inside the
printer causing errors. If this happens, perform the decondensation procedure. See
section "De-condensation" for more information.

If the error still does not clear after the printer acclimates to room temperature and
the power is turned back on, contact Sawgrass.
Network Interface Error
An error in the Ethernet port network function has occurred.
Turn the printer off, then turn it on again.

If the message reappears, contact Sawgrass.
Maintenance Failed
Head cleaning, head flushing, or other maintenance operations have failed.
Run the maintenance again after clearing the error.
You can clear a maintenance error as follows:

The printer receives another print job.

Press the [OK] key.
Cannot Recover Error Page
If you resume printing after removing a paper jam, an error message may appear if some
pages cannot be printed. If so, follow the procedure below:

Print by Form Feed.
Press the [Form Feed] selection key, then the printer prints the remaining pages
following the missed page(s).