sauter equitherm EQJW245, Руководство по эксплуатации

Страница: 53 / 127

EQJW245
53/127 www.sauter-controls.com
Commissioning
Device bus: receive return temperature 2
If CP 215 is set to 1, the controller receives the return temperature value from the
device bus and uses this instead of its own measurement.
Enabling CP 15 and CP215 simultaneously may be meaningful, both heating
circuits than use the same return temperature measurement that was received on
the device bus.
Device bus: digital room operating unit EDB100 for heating 2
If an EDB100 digital room operating unit is going to be used, CP218 must be set
to 1.
If an EDB100 digital room operating unit is used, the actual value is evaluated for
the room temperature by the EDB100. Measurements from other room operating
units or room sensors ( SP202) are ignored.
Device bus: address of EDB100 digital room operating unit for heating 2
The address of the EDB100 room operating unit assigned to the controller must
be set with CP219.
CP202
CP203
CP204