sauter equitherm EQJW245, Руководство по эксплуатации

Страница: 61 / 127

EQJW245
61/127 www.sauter-controls.com
Operation
15.0
°C
After you select the switch position 1.
for the top rotary switch, the current
room setpoint temperature for
reduced mode is shown.
15.0
°C
Push the input knob and the
Â
numerical value will fl ash...
15.5
°C
... and you can now change it by
Â
turning it upwards or downwards
(step value: 0.1°C).
15.5
°C
Push the input knob again to confi rm 2.
the changed numerical value.
Press the ESC button once before confi rming to cancel the input. The old value is
retained.
4.4 Weekly switching programme for heating
The weekly switching programme repeats itself every week. It comprises a
maximum of 48 switching commands (6 for each day and another 6 for the whole
week) with the associated operating modes which can be entered in a 10-minute
grid. The switching commands can be modifi ed individually and they are captive.
A switching command may be valid every day (1-7) or on a specifi ed day of the
week (Mon=1, Tue=2, etc.). If a switching command is present on a certain day
of the week (Mon, Tue, etc) the daily switching command (1-7) is not valid on that
day. An ‚empty‘ switching programme is interpreted as a switching programme in
normal mode.
The factory setting for the weekly programme is:
Day Time Mode
Daily 06:00 Normal mode
Daily 22:00 Reduced mode
You are recommended to note any change to the weekly switching programme in
the relevant table in Section 14. Before you can call up, view or edit the weekly
switching programme, you must check whether the bottom rotary switch is in one
of these positions (see 4.1).
Off mode
Continuous heating to normal domestic water temperature
Continuous heating to increased domestic water temperature