sauter equitherm EQJW245, Руководство по эксплуатации

Страница: 3 / 127

EQJW245
3/127 www.sauter-controls.com
Content
Content
Symbols used in this manual 7
Abbreviations 9
1 General information 11
1.1 Introduction 11
1.2 Safety information 11
2 Description of the operating controls 13
2.1 Front view of the EQJW245 13
2.2 Top Rotary switches (heating 1) 13
2.3 Middle rotary switch (heating 2) 14
2.4 Bottom rotary switch (domestic water) 14
2.5 Input knob 15
2.6 ESC key 15
2.7 Display 15
3 Commissioning 17
3.1 Operating the device for the fi rst time 17
3.1.1 Setting the time 17
3.1.2 Setting the date 18
3.2 Commissioning level 19
3.2.1 Access to commissioning level 19
3.2.2 View SERVice parameters 20
3.2.3 Change SERVice parameters 21
3.2.4 List of SERVice parameters 21
3.3 SERVice level 22
3.3.1 Access to SERVice level 22
3.3.2 View SERVice parameters 23
3.3.3 Change SERVice parameters 24
3.3.4 List of SERVice parameters 24
3.3.5 Explanations for individual SERVice parameters 28
3.4 Communication level 46
3.4.1 Access to communication level 46
3.4.2 Viewing the communication parameters 47
3.4.3 Changing communication parameters 47
3.4.4 List of communication parameters 48
3.4.5 Explanations of individual communication parameters 49
4 Operation 55
4.1 Operating modes 55
4.1.1 Displays when automatic mode is set 56
4.1.2 Displays when back-up mode, reduced mode and normal mode are
set 58
4.2 Entering the setpoint temperature in normal mode 59
4.3 Enter setpoint temperature in reduced mode 60
4.4 Weekly switching programme for heating 61