18 ACU-280
SATEL
3. Click on the “Delete”
button.
4. The “Confirm” window will open.
5. Click on the “Yes” button.
6. The “Confirm” window will close.
7. Click on the “Write” button to save changes to the controller (these data will not be saved
after clicking on the
button in the main menu).
LCD keypad
You can remove a wireless device in the service mode, using the “Remove device” function
(
“2.Hardware”
“1.Kpds. & exps.”
“3.Wireless dev.”
“ 3.Remove device”).
1. Start the “Remove device” function.
2. List of wireless zones will be displayed.
3. Use the
and
keys to select the zone to which the device you want to remove is
assigned.
4. Press .
5. A prompt will be displayed asking you whether to remove the device (type and serial
number of the device will be displayed).
6. Press the key 1.
7
Configuring the ABAX 2 system
To configure the wireless system settings you can use the DLOADX program or LCD keypad
(for more information on DLOADX program and LCD keypads, refer to the control panel
manuals).
For the INTEGRA / INTEGRA Plus control panel:
DLOADX program: “Structure” window
“Hardware” tab
“Expansion modules” branch
[controller name]
(Fig. 10).
LCD
keypad:
– system settings: service mode
“Structure”
“Hardware”
“Expanders”
“Settings”
[controller name]
,
– controller name: service mode
“Structure”
“Hardware”
“Expanders”
“Names”
[controller name]
.
For the VERSA / VERSA Plus / VERSA IP control panel:
DLOADX program: “VERSA – Structure” window
“Hardware” tab
“Expansion
modules” branch
[controller name]
.
LCD keypad:
– controller settings: service mode
“2.Hardware”
“1.Kpds & exps.”
“2.Settings”
[controller name]
,
– wireless devices settings: service mode
“2.Hardware”
“1.Kpds & exps.”
“3.Wireless dev.”.
Names of parameters and options from the DLOADX program are used in this manual.
Shown in square brackets at the description of a parameter or option is the name presented
on the display of the INTEGRA / INTEGRA Plus alarm system keypad.
