![Sapido we 1110 Скачать руководство пользователя страница 268](http://html1.mh-extra.com/html/sapido/we-1110/we-1110_user-manual_1198505268.webp)
268
5. Q: My WE-1110 cannot connect to the ISP?
A: There are three possible solutions:
1. Check the Cable/XDSL modem is power on.
2. Check the Cable/XDSL link light is on to verify a good physical connection.
3. Check the WAN port LED to verify if the Cable/XDSL modem is connected to
the router:
If your ISP Login method is following, please make sure the username and
password are correct or not.
If your ISP is using dynamic IP addressing (DHCP) then the DHCP protocol does
not have the authentication feature. Some Cable service providers often used the
following to determine user’s identification.
6. Q: Why is that I can ping to outside hosts, but not access Internet websites?
A: Check the DNS server settings on your PC. You should get the DNS servers settings
from your ISP. If your PC is running a DHCP client, remove any DNS IP address
setting. As the router assign the DNS settings to the DHCP-client-enabled PC.
7. Q: WE-1110 couldn’t save the setting after click on Apply button?
A: The WE-1110 start to run after the setting finished applying, but the setting didn’t
write into memory. Here we suggest if you want to make sure the setting would be
written into memory, please reboot the device via
GUI Reboot
system.
1. Wireless LAN
1. Q: Why couldn’t my wireless notebook work on-line, and after checking?
A: Generally, Wireless networks can sometimes be very complicated to setup,
particularly if you're dealing with encryption and products from different vendors.
Any number of variables can keep your workstations from talking with each other.
Let's go over some of the more common ones.
For starters, verify that your router and your workstation are using the same SSID
descriptions. SSID acts as a password when a mobile device tries to connect to the
wireless network. The SSID also differentiates one WLAN from another, so all
access points and all devices attempting to connect to a specific WLAN must use
the same SSID. A workstation will not be permitted to connect to the network unless
Содержание we 1110
