Sapido we 1110, Руководство пользователя

Страница: 209 / 285

209
Setting the Fragmentation too low may result in poor network performance. Only minor
modifications of this value are recommended.
4. SSID
Wireless network name, it is selected AP name in Quick Setup.
5. bg Mode
This field indicates the 802.11g interface mode. “802.11g” prevents the 802.11b clients
from accessing the router. “bg Mixed” allows both 802.11b and 802.11g clients to access
the router. “802.11b” will enable the network as an 802.11b wireless network. By default,
the Mode is “ bg Mixed ”.
6. Rate
Select the transmission rate for the network. The default setting is Auto.
7. Channel
IEEE 802.11g and 802.11b devices are direct sequence spread spectrum devices that
spread a radio signal over a range of frequencies. The range of frequencies used by a
direct sequence device is called Channel.
The 802.11g and 802.11b specification supports up to 14 overlapping Channels for radio
communication. To minimize interference, configure each WE-1110 to use
Non-overlapping channels. Non-overlapping channels have 25 MHz separation
beginning at the first allowed channel for the country (for the US and most of Europe,
channel 1, 6 & 11 are used.).
8. Specify an IP
Input the IP address, Subnet Mask, Gateway and DNS.
9. Encryption
Include Open System, Shared Key, TKIP and AES.
Open System & Shared Key
WEP Key
Support 64bits and 128bits WEP encryption, WEP can protect your data from
eavesdroppers. The “128bits” method is more secure than the “64bits”.
Key Type
For 64bits WEP key, either 5 ASCII characters or 10 hexadecimal digitals can be
inputed. For 128bits WEP key, either 13 ASCII characters or 26 hexadecimal digits
can be inputed.