If U disk is inserted incorrectly, the system prompt will be as follows:
Fig 4- 68 Prompt when U disk is not inserted
If U disk is inserted correctly and the remaining storage capacity satisfies the requirement,
the system will proceed to copy setup data and historical data into U disk.
The system will indicate successful backup after all data are processed completely and the
whole process will take 30-60sec.
Fig 4- 69 USB data backup complete
Note: The data of multiple hosts with different number can be backed up into a single U disk. If
the host number is identical, the original document will be overwritten during data backup.
4.6.2 USB data loading
Download the data in U disk into the system host. The host will search for all system files
automatically and copy them into data Flash of the host. The operation needs to be
reconsidered, as setup data of the host will be overwritten (note: historical files are copied
during data backup, but ignored during data load). The system prompt is as follows:
Fig 4- 70 Prompt of USB data loading
The system prompt is as follows after completion of data load:
Fig 4- 71 USB data loading complete
Note:
The newly-loaded data will take effect only after the system is re-electrified after
loading the data!
