4.3
Linkage c&e setup
The sub-menus under this category show as below:
Fig 4- 32 C&E setup menu
4.3.1 System linkage setup
The following section gives a brief description of common issues of linkage setup with the
system linkage as an example. The setup window is as follows:
Fig 4- 33 System linkage setup window
The setup interface is divided into 3 areas: condition area, output area and area of optional
activation devices.
Each page corresponds to a c&e equation. The setup flow of a c&e equation is as follows:
Step 1: Condition setup
Four buttons (Prev, Next, Add and Del) and a text input box are set above the condition
setting area, which are used for inquiring, adding or deleting linkage conditions.
Condition setup
Choose IO-board
and loop
Modules to be activated
when a condition is met
Confirm