Fig 4- 56 Register result
The above figure shows that 5 detectors are registered in the original setting, but only 2
detectors are on-line currently; 10 modules are registered, but only 7 modules are on-line. The
figure also prompts warning messages, such as "Press OK to enter setup interface" and
"register and manufact type address will be changed", to prompt the user to make choice.
When auto register is in process, the time countdown will be displayed at the bottom of the
screen. If current interface board is under communication, time-out error will occur when
counting down to 0, and the system prompt is as follows:
Fig 4- 57 Timeout error
Caution: System configuration might be overwritten after auto register, so take care
about this before you continue with it!
4.4.12 Disable current alarms
Same function with the “DISABLE” button on the front panel.
4.4.13 Query current disablement
The following window will pop up after selecting this menu item:
