Super user, system debugger and system administrator may log in the system by two ways.
1. Log in through standard USB keyboard. Pop up the login window by pressing Ctrl, Alt and
Del keys simultaneously (as shown below).
Fig 3- 7 Example of USB keyboard
2. Press "*" key at the left bottom corner of the panel, and pop up the login window.
Log in
Under logout state, press C
TRL
、
A
LT
+D
EL
on USB keyboard simultaneously, or press "*" key
at the left bottom corner of the panel, and pop up the password input window (as shown below).
Press E
NTER
key on USB keyboard or "OK" key on the panel keyboard to confirm.
Fig 3- 8 Password input window
Attention:
In order to keep confidential, "*" will be displayed in the input box when entering. After
login, panel keyboard will be activated at the same time and the KEYBOARD indicator lights.
Log out
Under login state, pressing C
TRL
, A
LT
+D
EL
keys on USB keyboard simultaneously, or
pressing "*" button on the panel will pop up the inquiry window. Select E
NTER
to log out.
Fig 3- 9 Inquiry window of log out
3.2.3.2 Staff-on-duty login via panel keyboard
The staff-on-duty can log in directly via panel keyboard.
Log in
Under log out state, press Keyboard button to enter the window of password input. The
button indicator will light when log in successfully.
Fig 3- 10 Staff-on-duty login interface
Log out
Under login state, pressing KEYBOARD button on the panel will exit the login state and the
button indicator goes off.
