show "√". Press "OK" button to save the setup and exit, otherwise press "Cancel" button to
retain the original setup and exit.
Prompt:
”SPRT-01” is a stylus printer defined by the system while “SPRT-02” is a thermal one.
Default transmission rate for the thermal printer is 9600BPS while 2400BPS for stylus printer.
4.1.9 Rename system
The name of the system can be changed:
Fig 4- 16 Window of renaming system
4.1.10 LCD auto-off
If choose this function ("
"is shown in front of the sub-menu), LCD will turn off
automatically after 5 minutes without system operation. Any key pressed or any move of the
mouse, LCD will turn on again.
This function is to assure the lifespan of LCD, so it’s advised for the user.
Note:
If the system is in alarm (whether it’s fault or fire), LCD Auto-off function will become
invalid and LCD latches on. So dispose abnormality ASAP to ensure the longevity of LCD.
4.2
CAN-Bus setup
The sub-menus show as below:
Fig 4- 17 CAN-Bus setup menus
4.2.1 IO-Board setup
The setup window is as below:
Fig 4- 18 IO-Board setup
