Sanding STS-750RC Series, Руководство пользователя

Страница: 18 / 152

17
Numeric Mode: User can only enter numbers.
Alphanumeric Mode: User can enter numbers and letters. By pressing several
times you can toggle through the characters. For example: A->B->C->7.
Press [F4] to switch between numeric and alphanumeric input mode.
Sign
The characters which can be input in STS-750RC Series are
：
A~Z . / $ % _ @ &
* ? ! +
－
etc.
+/
－ ：
In alphanumeric input mode, "+" and "-" are considered as normal
alphanumeric characters with no mathematical function. In numeric input mode, it
can only be used in front of the numbers entered.
Special characters
In wildcard searching, it is required to use the sign “*”. In character input mode of
STS-750RC Series, press [+/-] key once.
In the edit mode, the position of the decimal place cannot be changed. The
decimal place is skipped.
All keys can be entered into screen.
Use navigation key to move the cursor.
Use navigation key to delete the relevant character
2.8 POINTSEARCH
Pointsearch is a comprehensive function, which uses a procedure to search
measurement points or known points in internal memory.
The searching scope can be limited to a particular job or the whole storage.
The search procedure always finds known points before measured points that
fulfill the same search criteria. If several points meet the search criteria, then the
points are listed according to their storing time. The instrument finds the most
current (most newly-recorded) known point first.
Direct Search
By entering an actual P
tID (e.g.: “A12”), all points with the corresponding point
number are found.
There are many places to start the point searching function. Here, take searching
the known points in “setting station” as an example.