Sanako Lab 100, Руководство пользователя

Страница: 148 / 172

142
•
SANAKO Lab 100 User Guide
WINDOWS XP
1. Click Start to open the Windows main menu.
2. In the menu, point and click Control Panel .
3. Select Network Connections.
4. In the General sheet, select Local Area Connections, and
click Properties.
BOTH WINDOWS 2000 AND WINDOWS XP
5. In the General sheet, make sure Internet Protocol
(TCP/IP) is checked.
6. Double-click the Internet Protocol (TCP/IP) option, or
click Properties .
7. In the dialog window that opens, select Use the
following IP address .
8. In the IP address field, enter 172.24.1.1 and in the
Subnetmask field, enter 255.255.255.252
9. Click OK .
The following settings are needed only when a 3Com
Etherlink XL 10 network card is used:
1. In the Local Area Connection Properties sheet (the
General tab), click Configure.
2. Select the Advanced tab.
3. In the sheet that opens, in the Property window, select
Duplex Mode . In the value field, make sure Half Duplex
is selected.
4. In the Property window, select Media Type . Make sure
the value set is 100Base Tx.
5. Click OK .
TO SET A WORKGROUP
WINDOWS 2000
1. Click Start to open the Windows main menu.
2. In the menu, point Settings , point and click Control
Panel , and select System .
3. In the System Properties window, select the Network
Identification tab.
4. In the sheet that opens, click Properties . The
Identification Changes dialog window opens.
WINDOWS XP
1. Click Start to open the Windows main menu.